Ochno Software Releases

Ochno Power Conference 3

1.6.0 (September 25, 2023)

  • New: Topology feature can now list passthrough devices.
  • New: Topology feature can now list HDMI device.
  • New: Ability to configure USB-C port role (advanced).
  • Improved: Status of USB-C connections.
  • Improved: Internal USB device management and topology.
  • Improved: Scan for nearby wifi.
  • Improved: MAC address management.
  • Improved: Dynamic MTR resets when losing network.
  • Improved: MTR bug fixes for various hub setting combinations.
  • Improved: Admin mode, greatly increased stability and performance.
  • Improved: Automatic behaviours, such as switching and admin mode, when certain computer models connect.
  • Improved: IoT messaging, enables more features in the cloud.

1.5.0 (March 16, 2023)

  • New: Set active port and/or MTR mode using Ochno Operated.
  • New: Synchronize MTR meeting state with hub MTR mode, through Ochno Operated.
  • New: Restart USB passthrough using Ochno Operated.
  • New: Ability to OTA update firmware of internal component.
  • New: Configure a delay for automatic switch on disconnect.
  • Improved daisy-chain usage.
  • Improved network stability and performance.
  • Improved Over-The-Air (OTA) update process (note: from this version, not to this version).

1.4.5 (October 10, 2022)

  • Improved startup stability.
  • Improved network sensitivity during firmware updates.
  • Fix: Button long press correctly opening admin console after 5 seconds when MTR is configured.

1.4.4 (September 22, 2022)

  • New: Configure MTR systems to change mode with a LED button long press.
  • New: Configure MTR systems remember mode until certain events.
  • New: Configure that a button can be disabled.
  • Modified USB connection signals to include more USB devices.
  • Improved MTR functionality.
  • Improved IoT system messages.

1.4.0 (July 28, 2022)

1.3.5 (July 20, 2022)

  • WiFi can now connect to unsecure networks where password is excluded.
  • Updated default video handshake timers.
  • Improved HDMI communication.
  • Improved USB passthrough communication.
  • Added new console commands.

1.3.4 (July 13, 2022)

  • Improved values sent to LED buttons.
  • Improved compatibility with Ochno Management Console.

1.3.3 (May 8, 2022)

  • New: Access console with a LED button long press.
  • Fix setup issues with integrated MTR mode.

1.3.2 (April 6, 2022)

  • Fixed HDMI communication issues.
  • Updated default video handshake timers.
  • Improved USB passthrough communication.

1.3.1 (April 3, 2022)

  • New: Configurable timers for HDMI handshake.
  • New: Configurable timers for USB passthrough handshake.
  • New: Configurable value for turning off inactive ports.
  • Fix for crash during network interface switch.
  • Improved USB-C connect and disconnect triggers.

1.3.0 (February 1, 2022)

  • New: HDMI-CEC interface capabilities.
  • New: Integrated MTR mode.
  • Improved auto-switching triggers.

More information

    Book a demo

      Join Ochno!