Ochno AB
Kopparbergsvägen 45, 722 19 Västerås
Mail: contact@ochno.com
Kundtjänst: +46 21 475 04 00
Ochno management configurations
A configuration is a package of hub settings that can be saved, loaded and applied using Ochno Management Console.
Saving a configuration
1. Connect to a hub and verify that the settings that you want to save are correct.
2. Open the side menu using the toggle button in the top left corner.
3. Press ”Create” to open a dialog to save your settings. This dialog will use the currently selected settings, even if they have not been applied yet.
4. Enter a name and optionally add a description and images. Check the boxes for what you want to include in the configuration.
5. Press ”Save”.
Note: Pressing the ”Export” button will save your configuration to a file that you can import in another Ochno Management Console.
Applying a configuration
1. Connect to a hub that you want to apply a configuration to.
2. Open the side menu using the toggle button in the top left corner.
3. Press the configuration you want to apply, a dialog will open up.
4. Optionally filter what you want to apply using the checkboxes.
5. Press ”Apply”.
Note: The applied configuration only changes the selected values, make sure you also press the ”Apply” button for the hub to save the settings.
Importing a configuration file
To create a configuration file follow the steps for saving a configuration, or open a saved configuration, and press ”Export”.
1. Open the side menu using the toggle button in the top left corner.
2. Press ”Open”.
3. Navigate to your configuration file (.omc) and open it. A dialog will open up with the configuration information.
4. Press ”Save” to store the configuration in your Ochno Management Console.
