Release Notes


Ochno Power Conference 3

1.6.3 (Februari 6, 2024)

  • Changed: USB2 protocol is forced on when admin mode is active – otherwise OMC may not find hub.
    This impacts USB functionality on other ports. When testing system, do not keep admin mode on.
  • Improved: Channel selection for WiFi connections.
  • Improved: IoT messaging about hub state and updates.
  • Improved: Download speed for ccg updates.
  • Fixed: WiFi mac-address retrieved correctly.
  • Fixed: Moving USB devices to and from PC-based MTR port when connecting/disconnecting active BYOD port.
  • Fixed: Hub no longer by default looks for local IoT endpoint on network.

1.6.2 (November 21, 2023)

  • New: Reset firmware settings using console button.
    Instructions: Power off the hub. Press and hold the console button on the back of the hub while you power on the hub. Keep the button pressed for 10 seconds. The LED lights of the hub will flash three times when the reset is successful.
  • New: Support for latest HDMI adapter, this includes automatic switching based on the adapter connection state.
  • Improved: Network reconnection process has been updated.
  • Improved: IoT messaging about hub state.
  • Fixed: Device discovery when no active port is set.
  • Fixed: USB protocols are properly reset when changing port.
  • Fixed: USB3 protocols setup corrected for PC-based MTR using USB-C (from OPC3) to USB-A (MTR).

1.6.0 (September 25, 2023)

  • New: Topology feature can now list passthrough devices.
  • New: Topology feature can now list HDMI device.
  • New: Ability to configure USB-C port role (advanced).
  • Improved: Status of USB-C connections.
  • Improved: Internal USB device management and topology.
  • Improved: Scan for nearby wifi.
  • Improved: MAC address management.
  • Improved: Dynamic MTR resets when losing network.
  • Improved: MTR bug fixes for various hub setting combinations.
  • Improved: Admin mode, greatly increased stability and performance.
  • Improved: Automatic behaviours, such as switching and admin mode, when certain computer models connect.
  • Improved: IoT messaging, enables more features in the cloud.

1.5.0 (March 16, 2023)

  • New: Set active port and/or MTR mode using Ochno Operated.
  • New: Synchronize MTR meeting state with hub MTR mode, through Ochno Operated.
  • New: Restart USB passthrough using Ochno Operated.
  • New: Ability to OTA update firmware of internal component.
  • New: Configure a delay for automatic switch on disconnect.
  • Improved daisy-chain usage.
  • Improved network stability and performance.
  • Improved Over-The-Air (OTA) update process (note: from this version, not to this version).

1.4.5 (October 10, 2022)

  • Improved startup stability.
  • Improved network sensitivity during firmware updates.
  • Fix: Button long press correctly opening admin console after 5 seconds when MTR is configured

1.4.4 (September 22, 2022)

  • New: Configure MTR systems to change mode with a LED button long press.
  • New: Configure MTR systems remember mode until certain events.
  • New: Configure that a button can be disabled.
  • Modified USB connection signals to include more USB devices.
  • Improved MTR functionality.
  • Improved IoT system messages.

1.4.0 (July 28, 2022)

  • Greatly improved compatibility with Ochno Management Console.

1.3.5 (July 20, 2022)

  • WiFi can now connect to unsecure networks where password is excluded.
  • Updated default video handshake timers.
  • Improved HDMI communication.
  • Improved USB passthrough communication.
  • Added new console commands

1.3.4 (July 13, 2022)

  • Improved values sent to LED buttons.
  • Improved compatibility with Ochno Management Console

1.3.3 (May 8, 2022)

  • New: Access console with a LED button long press.
  • Fix setup issues with integrated MTR mode

1.3.2 (April 6, 2022)

  • Fixed HDMI communication issues.
  • Updated default video handshake timers.
  • Improved USB passthrough communication.

1.3.1 (April 3, 2022)

  • New: Configurable timers for HDMI handshake.
  • New: Configurable timers for USB passthrough handshake.
  • New: Configurable value for turning off inactive ports.
  • Fix for crash during network interface switch.
  • Improved USB-C connect and disconnect triggers.

1.3.0 (February 1, 2022)

  • New: HDMI-CEC interface capabilities.
  • New: Integrated MTR mode.
  • Improved auto-switching triggers.